Proper installation of the cantilever rack is essential. This ensures that the people who use it and the materials stored with it will never be in danger.
While it is true that installation is commonly performed by contractors, basic knowledge of cantilever racks is a huge advantage.
Sufficient knowledge allows you to perform an in-depth inspection, especially if suppliers are unable to meet your requirements.
How to install?
Cantilever racks require enough space for installation, and therefore space preparation is required. The concrete base must be strong enough to support it, because the cantilever column needs strong soil to withstand the grip of heavy materials.
In addition, the condition of the soil must be carefully studied, especially since the storage location changes rapidly with temperature.
The condition of the soil is different during the rainy season than during the dry season. Conducting a ground survey is essential. If you plan to place a high cantilever rack, make sure it can withstand strong winds and rain.
The storage location should also have solid boards and outdoor areas for support.
All this must be subject to permit requirements set by local authorities. If all these factors are correct, the console rack is ready for installation.
Assembly instructions
There are basically two steps for assembling medical trolley or cantilever racks. It is reinforcement and an anchor.
Each step must be critically completed to ensure its stability over the years. Make sure each part is strong for a long time.
Reinforcement is the process of installing columns, which must be built in 2 sections for stability. Most vendors will install more than 2 columns depending on the client’s requirements. Bracing is performed between each column – regardless of the number of rows and columns.
Fasteners are just as important in other parts as they prevent the stand from shaking. Bases attached to columns should have fasteners about ¾ inch bolts or nuts.
Also, the arms attached to the columns should be secured in the same size with bolts or nuts. Each attached column can require about 4 attachments. The brace is also attached to a pole of the same size.
Conclusion
It will take several days to complete the installation. When it’s ready, be sure to check the cantilever rack carefully to make sure it’s installed correctly.
It is best to ask the supplier if heavy materials should be placed on the shelves. This is so that the console accounts are strong enough to support the materials within the requirements you set. To learn more about this topic visit our website.